DJI underwater Wi-Fi doesnโt work โ and thereโs a clear reason why. Whether youโre using the DJI Action 5 Pro, Action 4, or earlier models, your camera loses connection to the DJI Mimo app the moment it goes underwater. This guide explains exactly whatโs going on โ and how Seavu offers the ultimate solution: DJI underwater wifi problem solved.
If Wi-Fi is blocked โ which happens immediately underwater โ you lose all app functionality.
Both Wi-Fi and Bluetooth operate at high frequencies with short wavelengths (6โ12 cm), which are quickly absorbed by water, especially saltwater. Even at 1 metre deep, signal strength is near zero. This is a physical limitation, not a camera flaw.
If you’re searching for a way to keep your DJI camera connected underwater, this is it. The Seavu system delivers a true DJI underwater wifi problem solved experience by moving the signal transmission point to the surface โ where Wi-Fi and Bluetooth work reliably.
No ports. No corrosion. Fully wireless from your device.
The Seavu signal system took 3 years to develop and is custom-built:
This setup enables up to 52 metres of reliable signal reach โ ideal for real-time underwater viewing from boat, shore, or pier.
Seavu operates on 2.4GHz because it’s:
Using Seavu with your DJI camera allows:
Ensure your DJI camera is set to 2.4GHz Wi-Fi for best results.
Without Seavu, your DJI underwater Wi-Fi connection fails as soon as the camera goes under โ disabling app control, live preview, and recording. With Seavu, you get uninterrupted access to the DJI Mimo app, streaming from depths of up to 50 metres while keeping your camera safe and sealed.
Need help choosing the right setup? Contact our team โ weโre happy to help.
GoPro cameras rely on Wi-Fi (2.4GHz or 5GHz) and Bluetooth Low Energy (BLE) to connect to the GoPro Quik app. These wireless protocols are excellent in air โ but the moment your camera is submerged, the connection fails completely.
Even at shallow depths, water absorbs radio signals so quickly that your phone can’t maintain connection. That means no live preview, no app control, and no livestreaming.
GoProโs app connection relies on two separate wireless systems, each serving a different role:
In short: Bluetooth connects you. Wi-Fi controls the camera.
If Wi-Fi is blocked โ as it is underwater โ the app becomes non-functional, even if Bluetooth briefly stays connected.
Both Wi-Fi and Bluetooth operate in the GHz range, with very short wavelengths (6โ12 cm). These signals are easily absorbed by water, especially saltwater.
The result:
This is a fundamental limitation of wireless communication through water โ not a GoPro flaw.
Seavu solves the underwater connectivity problem by moving the signal transmission point to the surface, where Wi-Fi and Bluetooth can function normally.
There are no hardwired connections to your phone or camera โ making the system fully waterproof, corrosion-resistant, and wireless above water.
Seavuโs connectivity system isnโt off-the-shelf โ itโs the result of three years of dedicated development and testing, used across both the Seeker and Explorer kits.
At the heart of the system is a passive, ultra-low-loss signal path, designed specifically to overcome the challenges of underwater wireless transmission. It includes:
This passive system requires no amplification along the cable, making it fully marine-proof, reliable, and low-maintenance.
Thanks to this low-loss design, Seavu achieves:
Seavuโs wireless system operates on the 2.4GHz band โ the optimal choice for range, stability, and compatibility.
Because the app stays connected via Seavuโs system, you can:
Seavu acts as a transparent bridge between your camera and your app โ no special software, no interference.
Seavu kits support GoPros that can be manually set to 2.4GHz Wi-Fi and have modern Bluetooth modules (BLE 5.0+ recommended for longer tethers):
โ ๏ธ Earlier GoPros or those with older Bluetooth (BLE 4.2) may not work with long tethers due to range limitations.
Without Seavu, your GoPro loses connection the moment it goes underwater. The app becomes unresponsive, live preview cuts out, and you lose the ability to record or adjust settings remotely. Wireless control is effectively limited to just a few centimetres below the surface, and exposed ports or DIY solutions risk corrosion over time.
With Seavu, you can stream live footage from depths of up to 50 metres while maintaining a fully functional connection to the GoPro Quik app. You get real-time preview, full camera control, and seamless recording โ all wirelessly, without any hardwired links to your phone. The entire system is sealed, marine-proof, and designed specifically for long-term reliability in harsh underwater environments.
Take your underwater footage to the next level with full control, real-time preview, and uninterrupted recording.
Need help choosing the right setup for your camera or application? Contact our team โ weโre here to help.