As underwater camera specialists, we at Seavu have been closely following the release of the new DJI Osmo 360 โ and like many others, weโve been wondering: Where is the official waterproof case?
Itโs a question thatโs especially important for those looking to shoot 360 underwater footage, and while the camera itself shows great promise, there are some serious limitations below the surface.
Why Weโre Excited About the DJI Osmo 360
At Seavu, we develop camera systems that let you stream live underwater footage from DJI cameras to your phone or tablet via the Mimo app.ย Our products are trusted by fishers, filmmakers, researchers, and professionals worldwide to explore and capture the underwater world in real time.
The DJI Osmo 360 opens up exciting new possibilities. A fully spherical live view of the marine environment โ streamed directly to a mobile device โ could transform how our users scope fishing grounds, record inspections, or create immersive content. But for that to work properly, a purpose-built waterproof case is essential.
What makes this camera even more promising is DJIโs use of new square-format image sensors โ a first for their 360 lineup. These sensors are physically larger than the traditional 1/2.3″ sensors found in older models, allowing them to capture significantly more light in low-visibility conditions like murky water or deeper depths. In real-world terms, this could translate to up to twice the brightness and clarity in low-light underwater environments, reducing grain and helping subjects pop with greater detail โ even without artificial lighting.
Where other 360 cameras have fallen short with underwater filming, the Osmo 360 shows real promise in overcoming those low-light challenges.
DJIโs Current Advice: Donโt Use the Camera Underwater (Yet)
Despite the Osmo 360 having an IP68 waterproof rating, DJI currently advises against underwater use. In a TechRadar review (July 31, 2025), DJI confirmed that the camera is not recommended for use underwater due to image distortion and stitching issues caused by its convex fisheye lenses.ย This is reinforced by DrDroneโs technical spec summary, which states the Osmo 360 is waterproof to 10โฏm when ports are sealed โ but โit is not recommended to use the camera body underwaterโ due to visual artefacts.
Why 360 Cameras Struggle Underwater
This isnโt just a DJI issue. All 360 cameras face the same challenge: refraction. Water bends light differently on each lens, which causes mismatched stitching and distortion.ย Insta360 addressed thisย by releasing a specialised waterproof case with dome lenses for their X3 camera. These domes help correct refraction and improve underwater stitching dramatically. We believe DJI will follow a similar approach.
Signs a Waterproof Case Was Planned
- When we first powered on our Osmo 360, there was a โWaterproof Case Modeโ in the settings. After a firmware update, this option disappeared.
- Australian authorised reseller D1Store briefly listed the DJI Osmo 360 Invisible Waterproof Case
(SKU CPOS.00000454.01) for $209 AUD, but the page now returns a 404. - Other DJI resellers also posted listings with the same SKU โ no photos, no specs, no stock.
- DJI Osmo 360 Waterproof Case Mode: a quiet hint of whatโs coming underwater.
DJIโs Official Response to Our Enquiry
To get clarity, we contacted DJI directly. Several helpful team members tried to assist, but the official response was: โItโs not available, and we canโt say when it will be.โย This somewhat confirms what weโve seen: the product exists, but DJI is not yet ready to launch it publicly.
However, an authorised DJI reseller has told us the case is expected to be available in early September. This suggests that while DJI remains tight-lipped, preparations for release are already in motion.
What We Can Expect from the DJI Osmo 360 Invisible Waterproof Case
If DJI follows industry trends, we can expect the Osmo 360 waterproof case to feature dome-shaped lenses that help correct refraction โ a crucial element for accurate 360ยฐ stitching underwater. It’s also likely to use a GoPro-style finger mount, enabling compatibility with a wide range of poles and mounting systems. Given DJIโs track record with accessories, we anticipate a tight, low-profile design to keep the camera within its invisible stitch zone and maintain hydrodynamic performance. The fact that it was referred to as the โInvisible Waterproof Caseโ suggests theyโre aiming for minimal visual interference, even when submerged.
Our Take: Postponed, Not Cancelled
We believe DJI had intended to release the waterproof case alongside the camera but chose to delay it until they could refine both optical performance and software support. Given the challenges of underwater stitching, we fully expect the final version to feature dome lenses โ the only viable approach for reliable results underwater. And when that case does launch, weโll be ready.
Why It Matters for Seavu Users
The ability to stream live 360ยฐ underwater footage โ in real time โ is something weโre genuinely excited about. A DJI Osmo 360 in a waterproof housing could pair beautifully with Seavuโs systems, opening up new creative and functional possibilities for our community. Whether itโs mounted on a pole, used for inspections, or capturing cinematic underwater sequences, the potential applications are enormous.
Weโre keeping a close eye on developments โ and letโs just say, the idea of 360ยฐ underwater livestreaming has certainly sparked some ideas here at Seavu.
From marine research and exploration to filmmaking and fishing, the Osmo 360 – once housed correctly – could unlock an entirely new way to experience the underwater world.
Summary
- DJI has officially advised against underwater use of the Osmo 360 without a housing (TechRadar).
- A waterproof case (SKU CPOS.00000454.01) was briefly listed by D1Store for $209 AUD.
- We contacted DJI directly โ they confirmed the case is โnot availableโ and could not provide a release date.
- โWaterproof Case Modeโ appeared in early firmware, supporting the idea that the case was in development.
- We expect a dome-lens design similar to Insta360โs.
- Expected to be available in early September.
- At Seavu, weโre preparing for the moment the case launches – and we canโt wait to test it in the field.