Back to user guides

Kit Set Up Guides

Our accessory system allows the Seavu Explorer to be used in a wide range of applications.

Here’s a few guides on quick and easy application set-up.

Drop Camera

The Seavu Explorer can be used as a drop camera for livestreaming underwater footage at various depths.

For this application, you will need:

      • Explorer
      • Weight
      • Drift Fin
      • Cable Reel or Hand Reel
      • Short Strain Relief
      • Buoy (optional)
      • Cable Fastener (optional)

Assembly Steps:

  1. Begin by attaching the weight and then the drift fin to the Explorer. If needed, additional weights are available for purchase and can be stacked to enhance stability in strong currents.
  2. Insert the livestream cable receiver into the Explorer. Fasten the short strain relief onto the cable, and depending on the desired camera angle, clip it to one of the top anchor points.
  3. To suspend the Explorer at your desired depth, you can attach the buoy to the cable. Determine the length at which you want to suspend the Explorer and secure the buoy to the cable by looping the cord around the cable and over the buoy, then pull to tighten.
  4. When using the buoy, you can let out the livestream cable, allowing the Explorer to drift into action, such as capturing a bait ball.
  5. If you need to maintain a fixed length or depth for the cable, the Cable Fastener can be used.
  6. Important Note: The drop camera application should only be used when the boat motor is turned off or in neutral.
Drifting

Utilizing the Seavu Explorer for Livestreaming Underwater Footage While Drifting at Different Depths

For this application, you will need:

  • Explorer
  • Weight
  • Drift Fin
  • Cable Reel or Hand Reel
  • Long strain relief
  • Release Clips (optional)
  • Cable Fastener

Assembly Steps:

  1. Begin by attaching the weight and then the drift fin to the Explorer. If necessary, additional weights are available for purchase and can be stacked to enhance stability, especially in strong currents.
  2. Insert the livestream cable receiver into the Explorer. Secure the long strain relief onto the cable and then clip it to the rear anchor point.
  3. To keep your fishing line and lure within the camera’s view while drifting, you can use our Release Clips. Attach the release clip to the top anchor points on the Explorer by loosening the bolts with the included Allen keys. Insert the release clip and re-tighten the bolts.
  4. Position the large release clip on the middle and end bolts, while the small release clip should be positioned on the front and middle bolts.
  5. You can adjust the line grip tension by pushing the slider on the clip backward.
  6. Deploy the Explorer from the back of the boat, and when you reach your desired drift depth, secure the livestream cable with the Cable Fastener.
  7. Please note that the drop camera application should only be used when the boat motor is turned off or in neutral
Trolling

Using the Seavu Explorer for Underwater Livestreaming While Trolling

For this application, you will need:

  • Explorer
  • Troll Fin
  • Cable Reel
  • Long Strain Relief
  • Release Clip (optional)
  • Cable Fastener

Assembly Steps:

  1. Attach the troll fin to the Explorer. The troll fin comes with a built-in 500g weight and does not require additional weighting.
  2. Insert the livestream cable receiver into the Explorer.
  3. Fix the long strain relief onto the cable and clip it onto the anchor point of the Explorer.
  4. To place your fishing line and lure within the camera’s view while trolling, you can use our Release Clips. Attach the large release clip to the top middle and end anchor points on the Explorer by loosening the bolts with the Allen keys included, then insert the release clip and tighten the bolts. Adjust the line grip tension by pushing the slider on the clip backward.
  5. Deploy the Explorer from the back of the boat when traveling at very low speed being careful to avoid any propellers. Release the desired length of cable (a short corner is recommended) and  fasten the livestream cable to a boat cleat or rail using the Cable Fastener.
  6. You can now increase your speed to your desired trolling speed.
  7. The troll fin is designed to keep the Explorer approximately 1 meter below the surface.
  8. Please ensure that you stay within a maximum speed of 8 knots or 15 km/h.
Seafloor

The Seavu Explorer can be used to livestream underwater footage from the seafloor.

For this application, you will need:

  • Explorer
  • Weight (optional)
  • Cable Reel
  • Short strain relief
  • Seafloor Stand
  • Burley pot (optional)
  • Cable fastener

Assembly Steps:

  1. Start by attaching the Seafloor Ball Adapter to the Explorer. If the current is strong, you may choose to add Weight for stability.
  2. Insert the livestream cable receiver into the Explorer. Fix the short strain relief onto the cable, and then clip it to the center, top anchor point.
  3. The Seafloor Stand is equipped with a fin that will naturally point in the direction of the current. Adjust the stand’s legs to your preferred height. Spreading out the stand legs can increase stability in stronger currents.
  4. Secure the Explorer onto the stand by placing the ball mount into the arm on the stand. Adjust the direction and angle of the Explorer as needed, then tighten the arm to set it in place.
  5. If desired, you can fit an optional Burley Pot by clipping it to the O-ring on the Seafloor Stand.
  6. Deploy both the Explorer and Seafloor Stand from the side of the boat.
  7. Use the Cable Fastener to hold the cable at the desired length. If the boat is swinging, ensure there’s enough slack in the cable to prevent the Seafloor Stand from being pulled.
  8. Please note that the Seafloor application should only be used when the boat is anchored.
Extension Pole

The Seavu Explorer can be used to livestream underwater footage with an extension pole.

For this application, you will need:

  • Explorer
  • Weight
  • Cable Reel, Hand Reel or Pole Cable
  • Pole Adapter
  • Painters Pole with a 3/4″ 5 thread fitting (not included)

Assembly Steps:

  1. Begin by screwing the Pole Mount adapter into a painter’s pole. We’ve designed this setup to avoid the need for an expensive extension pole – any painter’s pole with a standard 3/4″ 5-thread fitting will work perfectly.
  2. Attach the weight to the Explorer, and then secure the Pole Mount to it. Afterward, insert the receiver.
  3. Please note that the Explorer and action camera will be positioned upside down in this configuration. Ensure that the action camera’s orientation lock is OFF to allow the camera to adjust itself correctly.
  4. The Extension Pole application should only be used when the boat is anchored or drifting.

.

Guide Index

Your cart is currently empty.

Kits
Terms & Conditions
Privacy Policy

1. Definitions and Interpretation

1.1 Definitions

In this Agreement the following definitions apply:

  1. Ambassador means the key person set out in item 1 of SCHEDULE 1
  2. Ambassador’s Commission means the commission to be paid to the Ambassador by the Company for Ambassador referred sales as set out in SCHEDULE 4.
  3. Commencement Date means the date set out in item 1 of SCHEDULE 1;
  4. Discount Codes means the discount code or codes set out in item 1 of SCHEDULE 4.
  5. Endorsement Services means the promotional and endorsement services provided by the Ambassador that are referred to in clause 3(a) and set out in SCHEDULE 2;
  6. Intellectual Property means any and all intellectual and industrial property rights that are described in SCHEDULE 3;
  7. Products means the goods to be endorsed by the Ambassador that are described in SCHEDULE 5, including new Products that may be produced by the Company as agreed in writing between the parties;
  8. Promotional Material means the promotional material for the Products created by the Ambassador using the Intellectual Property, including name, likeness or signature of the Ambassador, and the photographs and video material including the Ambassador that the Ambassador creates as the result of the Ambassador providing the Endorsement Services;
  9. Term means the period of time described in clause 2 and item 3 of SCHEDULE 1;
  10. Territory means the geographical locations described in item 4 of SCHEDULE 1;

1.2 Interpretation

In this Agreement:

  1. a reference in this Agreement to a statute or a section of a statute includes all amendments to that statute or section passed in substitution for the statute or section referred to and incorporating any of its provisions;
  2. “related body corporate” will have the meaning as defined in the Corporations Act 2001 (Cth);
  3. this Agreement must not be interpreted adversely to a party only because that party was responsible for preparing it;
  4. headings are for convenience only and do not affect the interpretation of this Agreement;
  5. references to a person or words denoting a person includes a company, statutory corporation, partnership, joint venture and association, and includes that person’s legal personal representatives, executors, administrators, successors and permitted assigns;
  6. every obligation entered into by two or more parties binds them jointly and each of them severally;
  7. where any word or phrase is defined in this Agreement, any other grammatical form of that word or phrase will have a corresponding meaning;
  8. “includes”, “including” and similar expressions are not words of limitation;
  9. all monetary amounts are in Australian dollars; and.
  10. reference to any agreement or other document annexed to or referred to in this Agreement includes any amendments to it and any documents in addition to or in substitution for it which has been approved in writing by the parties to this Agreement.

2. Commencement and Term

This Agreement commences on the Commencement Date and continues subject to any rights of early termination under clause 8 for a period of time set out in item 3 of SCHEDULE 1.

3. Endorsement and Promotion of Products

  1. The Ambassador agrees to:
    1. provide the non-exclusive Endorsement Services to the Company in the Territory for the period of time set out in item 3 of SCHEDULE 1 starting on the Commencement Date set out in item 1 of SCHEDULE 1;
    2. use reasonable endeavours to promote the Products in a matter consistent with the authorised use of the Products on the Ambassador’s social media accounts and website;
  2. This Agreement does not affect or restrict the Ambassador’s right to advertise, endorse or promote any goods and services in the Territory that do not compete with the Company’s Products.

4. Intellectual Property

  1. The Ambassador acknowledges that all Intellectual Property belong to the Company absolutely for its own use and benefit.
  2. The Ambassador grants to the Company a non-exclusive licence to use the Promotional Materials on the Company’s social media accounts, websites and other promotional materials and this clause shall endure beyond the termination of this agreement.

5. Warranties

The Ambassador warrants during the Term of this Agreement that:

  1. the Ambassador has the right to market and promote the name, personality, likeness, reputation, signature and visual image of the Ambassador in a manner contemplated by this Agreement;
  2. no similar licence has been granted to any other party in order to promote or endorse any product or service that competes with Products;
  3. the execution of the Agreement or performance by the Ambassador will not cause it to be in breach of any agreement to which it is a party; 
  4. the Ambassador will not advocate illegal activity or be obscene, defamatory or otherwise violate the rights of any nature whatsoever of any person;
  5. the Ambassador will not communicate or publish any material that is inconsistent with a positive image or goodwill relating to the Company;
  6. it is responsible for all costs and expenses in relation to this Agreement, including the provision of the Endorsement Services; and.
  7. the Ambassador will not do anything which will or will be likely to bring the Ambassador, the Company or the Product into public disrepute.

6. Ambassador's obligations

  1. The Ambassador must provide copies of all Promotional Materials to the Company as soon as is practicable after the production of the Promotional Materials.
  2. The Ambassador agrees that it will not during the Term of this Agreement or any extension or renewal provide its professional services in any manner whatsoever to any person or Company with the purpose or effect or likely effect of promoting any goods or services that compete in the Territory with the Product.
  3. The Ambassador must keep confidential all information relating to the business of the Company out of the public domain including but not limited to business and marketing plans, projections, arrangements and agreements with third parties and customer information imparted to the Ambassador during the period of this Agreement.
  4. Regardless the provisions of clause 6(b) the Ambassador may disclose information if and to the extent that:
    1. such disclosure is forced by laws, regulations or orders;
    2. the information is generally available in the public domain except where that is a result of a disclosure in breach of this Agreement; and
    3. the Ambassador can prove that it knew the information before the information was disclosed to it by the Company.

7. Company’s Obligation

  1. The Company agrees that it:
    1. shall provide the Products to the Ambassador to enable the Ambassador to provide the Endorsement Services;
    2. shall provide merchandise to the Ambassador for the Ambassador to wear in the provision of the Endorsement Services;
    3. has the discretion to use the Promotional Material on the Company’s social media accounts and website and the Company’s other promotional material;
    4. shall provide support to the Ambassador to enable the Ambassador to understand and use the functionality of the Products;
    5. has the discretion to provide the Ambassador with new Products developed by the Company;
    6. will enable the Discount Codes to provide a discount to the Ambassador’s referred clients who purchase the Product’s on the Company’s website;
    7. will pay the Ambassador’s Commission in accordance with the terms stated in SCHEDULE 4.

8. Termination

  1. This Agreement may be terminated by the Company in any of the following circumstances:
    1. with 7 days’ written notice for convenience;
    2. if during the Term the Ambassador is unable to perform the services required to be provided under this Agreement by reason of its death, illness or physical or mental disability;
    3. if the Ambassador is in breach of any terms of this Agreement which have not been rectified within 7 days of notice being given in writing by the Company specifying the nature of such default and matters to be attended in order to rectify the default;
    4. if the Ambassador is arrested or convicted of any criminal offence other than an offence which in the reasonable opinion of the Company does not affect the advertising and promotion of the Product; and
    5. if the Ambassador does anything which in the reasonable opinion of the Company is a breach of clause 5(d) or will or will be likely to bring the Ambassador, the Company or the Product into public disrepute.
  2. This Agreement may be terminated by the Ambassador in any of the following circumstances:
    1. if the Company breaches any terms of this Agreement which has not been rectified within 7 days of the Ambassador providing such notice in writing specifying the nature of default;
    2. upon the happening of any of the following insolvency events:
      1. a receiver, receiver and manager, administrator, liquidator or similar officer is appointed to the Company or any of its assets;
      2. the Company enters into, or resolves to, enter into, a scheme  or arrangement, compromise or composition with any class of creditors;
      3. a resolution is passed or an application to a court is taken for the winding up, dissolution, official management or administration of the Company; or
      4. anything having a substantially similar effect to any of the events specified above happens under the law of any applicable jurisdiction.
    3. On the expiry or early termination of this Agreement, Ambassador will cease to provide the Endorsement Services.

9. Indemnity

  1. The Ambassador agrees to hold the Company, its officers, agents, assignees and employees harmless from any liability from any injury, damage or claim suffered by the Ambassador arising from or relating to this Agreement and the Ambassador’s provision of the Endorsed Services.  

10. Dispute Resolution

  1. If a dispute arises in connection with this Agreement, a party may give the other party a notice specifying the dispute.
  2. Within 5 business days after the notice is given, each party may nominate in writing a representative to settle the dispute on its behalf.
  3. Within 7 business days after the notice is given, the parties must confer to resolve the dispute or to decide the method of resolving the dispute. Each party must use its best efforts to resolve the dispute.
  4. Unless the parties otherwise agree, the dispute must be referred to mediation if not resolved within 14 business days after the notice is given.
  5. The parties must appoint a mediator within 21 business days after the notice is given. If the parties fail to agree on a mediator, the mediator must be nominated by the President of the Law Institute of Victoria.
  6. Unless otherwise agreed by the parties in writing, the mediator’s decision is not binding on the parties. The role of the mediator is to assist in negotiating a resolution to the dispute.
  7. If the dispute is not resolved within 21 business days after the mediator’s appointment, then the mediation ends.
  8. The dispute resolution process does not affect any party’s obligations under this Agreement.
  9. Each party is to pay its own costs of the mediation process.
  10. The parties are to pay, in equal shares, the mediator’s costs and any other third party costs required by the mediator.
  11. If a dispute arises in relation to this Agreement, each party must keep confidential:
    1. all information or documents disclosed in the course of resolving the dispute before the appointment of the mediator;
    2. all information or documents disclosed in the course of the mediation;
    3. all information and documents about the existence, conduct, status or outcomes of the mediation; and
    4. all information and documents relating to the terms of any mediation settlement agreement.
  12. Neither party may commence court proceedings, in any jurisdiction, until the mediation ends. This does not affect either party’s right to seek urgent injunctive or declaratory relief.

11. Notices

  1. All notices required or permitted hereunder must be in writing in English and the address for service of notices is either the postal address or email address of the party to be served as stated in this Agreement or any postal address or email address such party may have designated in writing as the address for service of notices.
  2. Notices sent to the recipient’s postal address must be sent by registered or certified mail, return receipt requested.
  3. Unless otherwise specified, notices must be deemed to have been delivered when receipt is acknowledged by the recipient or 72 hours from the time the notice is sent (whichever is sooner).
  4. In relation to email, receipt is deemed to be acknowledged by the recipient by a delivery receipt notification generated by the recipient’s email system after sending of the email containing the notice or to which the notice is attached. Emailing notices will constitute sufficient and effective delivery when delivered to the recipient’s email account, whether or not the specific electronic communication is accessed or read.

12. Limitation on assignment

  1. The Ambassador must not assign all or any of its rights given to it under this Agreement without the prior written consent of the Company, which consent the Company may grant or not in its absolute discretion;
  2. The Company may at its discretion assign all or any of its rights under this Agreement.

13. Further agreements

Each party must execute such agreements, deeds and documents and do or cause to be executed or done all such acts and things as necessary to give effect to this Agreement.

14. General provisions

  1. No partnership or agency relationship
    Nothing contained in this Agreement must be deemed to constitute partnership between the parties and nothing contained in this Agreement must deem either party to be the agent of the other party and the Affiliate must not hold itself out as, engage in any conduct or make any representation which may suggest to any person that the Licensee is for any purposes, the agent of the Company.
  2. Electronic Execution
    The parties agree that this Agreement may be delivered and executed electronically.
  3. Confidentiality
    The parties acknowledge and covenant to keep the contents of this Agreement and the obligations of each party arising from this Agreement confidential and will not make any disclosures in this regard to any other party or entity unless as required by law.
  4. Entire agreement
    This Agreement sets out the entire agreement between the parties and it replaces all previous communications, representations, inducements, undertakings, agreements and arrangements between the parties in respect of its subject matter and this Agreement may not be modified except by written agreement signed by each party.
  5. No waiver
    Failure to exercise, or any delay in exercising, any right, power or remedy by a party does not operate as a waiver. A single or partial exercise of any right, power or remedy does not preclude any further exercise of that or any other right, power or remedy. A waiver is not valid or binding on the party granting that waiver unless made in writing.
  6. Severance
    If any provision of this Agreement is void, illegal or unenforceable, it may be severed without affecting the enforceability of the other provisions in this Agreement.
  7. Jurisdiction
    This Agreement is subject to the laws of the State of Victoria with the Courts of the State of Victoria having exclusive jurisdiction over any disputes arising in respect of this Agreement.
SEAVU

SEAVU

Typically replies within an hour

I will be back soon

SEAVU

Hey there 👋,
how can I help?

Start chat whatsapp
Message Us